The lining made in accordance with the TS 113 standard is a bitumen emulsion. It allows the membranes to stick to the surface more easily. 400 g is used for 1 m2 area.

It is a diagonel bubbling protection sheet which is made of high density polyethylene and protects the applied waterproofing from the damages that may occur during filling.

It is a diagonel bubbling protection sheet which is made of high density polyethylene and protects the applied waterproofing from the damages that may occur during filling.

It is a diagonel bubbling protection sheet which is made of high density polyethylene and protects the applied waterproofing from the damages that may occur during filling.

Made of Polypropylene or Polyester raw material, is a nonwoven textile product where fiber is combined with needling method. There is no warp and warp in knitted geotextile. Geotextile is a permeable textile product that can be used with any material related to ground slip, soil or geotechnical engineering. It has a homogeneous structure.

Shingle upper surface mineral stone particles, tear and breakage in the middle part of the glass tulle, and the lower surface is applied to the floor to be adhered with rubber mixed bitumen layer is covered with different shapes and sizes of the last layer of roof covering.

Shingle ridge band, plastomer modified, glass tulle carrier, top face mineral, lower face sand covered, bitumen waterproofing material.

Wall C-100 Drywall Profile is used for interior partition wall applications, curtain wall applications and shaft wall applications by making metal bearing frame 100 mm.

Wall C-75 Gypsum Board Profile is used for interior partition wall applications, curtain wall applications and shaft wall applications by making metal bearing frame 75 mm.

Wall C-50 Gypsum Board Profile is used in interior partition wall applications, curtain wall applications and shaft wall applications by making metal bearing frame 50 mm.

Wall U-100 Drywall Profile is used for interior partition wall applications, curtain wall applications and shaft wall applications by making metal bearing frame 100 mm.

Wall U-75 Gypsum Board Profile is used for interior partition wall applications, curtain wall applications and shaft wall applications by making metal bearing frame 75 mm.

Wall U-50 Gypsum Board Profile is used for interior partition wall applications, curtain wall applications and shaft wall applications by making metal bearing frame 50 mm.

Ceiling C Gypsum Board Profile can be produced in any lengths other than the standard 3m according to the project. Ceiling C Gypsum Board Profile can be used for any interior ceilings.

Ceiling U Gypsum Board Profile is a metal bearing frame for indoor and outdoor ceiling applications. Gypsum board When building a suspended ceiling, it is screwed onto the wall at the height of the suspended ceiling, and thus serves as the jeans transmitter and scales. While the curtain wall is being formed, it finds in the system the floor of the floor and ceiling.